Home > News > Content
Wire Drawing Machine Scalability
Jul 14, 2017

Wire Drawing Machine Scalability

1. To use the drawing die to pull, is to use the power winding stretch copper wire, the copper wire through the drawing die forward to produce pultruded plastic deformation, and uniform shrinkage extension.

2. Drawing machine is the use of copper wire with the scalability, the use of mold compression to make its diameter smaller, so as to achieve the size of the wire we need, the machine by the line and take the two parts, through the inverter or mechanical Adjust to achieve a unified state of the two.

What are the industries used in the drawing machine?

Drawing machine industry, involving a wide range of equipment, the common drawing machine has a water tank-type drawing machine, straight into the wire drawing machine, pulley-type drawing machine, inverted vertical drawing machine, wire drawing machine is mainly used in copper wire, stainless steel wire And other metal cable materials processing, cable manufacturing industry is extremely important processing equipment. With the continuous development of frequency control technology, frequency converter has been widely used in the wire drawing machine industry, bear the drawing speed, tension coiling, multi-level synchronous control and other aspects of the application of the inverter, greatly improving the drawing machine Of the level of automation and processing capacity, effectively reducing the unit's energy consumption and maintenance costs, has been widely recognized by the industry.

Line: the wire of the line, for the entire wire drawing machine link, the control is not too high precision requirements, most of the drawing machine, the operation of the line is driven by the frequency drive to achieve, but there are some double Frequency control of the drawing machine, and even directly through the drawing of the thread tension pull into the wire drawing machine, to achieve free off line;

Drawing: Drawing is the most important part of the drawing machine. Different metal materials, different silk varieties and requirements, drawing links are very different, the article will be described later in detail the water tank drawing machine and straight into the drawing machine specific operation process;

Take-off: the speed of the connection process determines the entire drawing machine production efficiency, but also the most difficult part of the entire system control. In the take-up part, the commonly used control technology has synchronous control and tension control to achieve the rolling of metal products

  In the process of production, there will be times the phenomenon of broken wire, if it is because of wear and tear leaving the sizing die area becomes larger, then the problem as long as the usual attention to prevent the inspection work can be easily resolved. It may be due to the instability caused by the current, then we should pay attention to whether the stability of the annealing current, this should continue to pay attention in the production process, especially in the beginning of the time, with particular attention to changes in current, according to changes in line speed to adjust Returns the current size. The last situation in the production process rarely occurs, almost no, that is, the quality of the rod, as long as the procurement time to good, this problem will not be a problem.

  In fact, as long as the actual production of more attention and more attention, then the wire drawing machine in the production process will not appear frequent broken wire phenomenon, which will be conducive to copper wire drawing machine product quality and productivity improvement for enterprises to bring more profits The.