Home > News > Content
Cable Armoring Machine Part Of The Size Of The Line
Aug 01, 2017

Cable Armoring Machine Part of the size of the line

For the stranding machine, the line often play a major role, the type of stranding machine often to the size of the part of the line to name, and the beam machine is the main part of the take-up line, the type of beam machine, according to it The size of the line to be named.

One, beam machine

As the beam machine running movements are in the line part, the transmission are installed in the rotating column, which determines the beam machine can only be made into a twisted, smaller specifications of the product.

At present, the most commonly used double pitch beam machine is characterized by fast speed, high production efficiency, the most advanced beam machine speed up to 3600r / min, 7000 pitch / min.

Second, the tube stranding machine

Tube stranding machine (tube cutter) is a high-speed twisting machine, the quality of its twisted strand with the twist of the cage cutter the same, while the productivity is much higher than the tube cutter specifications and models are The number of the reel and the diameter of the reel to distinguish, commonly used pipe cutter has 6, 12, 18 and so on several, the diameter of the reel is 200mm, 400mm, 500mm, 630mm and so on.

Third, cage-type stranding machine

Cage cutter machine are placed in the rotation of the winch cage, the shape of the cage like a cage, so that cage-type stranding machine, stranded way to retreat can not retreat. Widely used, the disadvantage is that the reel are distributed in the circumference of the circumference of the cage, the weight of the cage, the inertia is relatively large, the speed can not be improved, the productivity is low.

Cage-type stranding machine and box-type stranding machine difference, what are the characteristics?

1, the cage hoist mechanism installed in the winch of the active gear of the end of the planetary gear retreat device can also adjust the degree of retreat, commonly used in power cables into the cable machine in a variety of cage cutter.

2, there are two twisting device: connecting rod and planetary gear type.

3, which way three traction? Single traction wheel, double traction wheel and covered traction

Single traction wheel type twisting machine commonly used in a form, stranded on the wheel surface after winding a few laps lead to the collection line mechanism, a single traction wheel must have a wire device, a sub-line dial line and sub-ring Two lines.

Recently in the stranding machine in the take-up device gradually use a separate force from the motor to drive the line, take the power from the traction wheel does not need to turn, and turn the coil speed changes by the torque motor to ensure the characteristics.

4, the cable body recently using non-threaded fiber optic poles cable mechanism, the pole on the thread without screws, equipped with three rotatable ring, the use of circular and light rod intersection angle and friction to produce reciprocating cable movement, Adjust the size and aspect of the ring and the light bar, you can get different cable pitch and direction.

Four, fork-type stranding machine

Due to the compact structure of the forked winch, the laying disc is placed close to the rotating hollow shaft, and there is no floating cradle part of the cage cutter. Therefore, the speed of the fork can be improved and the productivity is higher than that of the same type Low, but the disadvantage is no retreat device, commonly used in the manufacture of copper and aluminum wire and pressure wire and other conductors.

Five, box-type stranding machine

Its speed than the same specifications of the cage cutter doubled, do not have a tugboat. The disadvantage is not retreat, suitable for tight round, fan-shaped stranded conductor, aluminum wire, ACSR and split conductor preload and so on.