Home > Exhibition > Content
How to remove a single screw pump
May 02, 2018

When the single screw pump is disassembled, the entire pump must be removed from the pipe. The pump head has four tie rods that fix the stator of the pump and remove it. Use a rubber hammer to knock down the pump head. Lock the stator of the pump with a chain clamp, open the fan cover of the motor, rotate the fan blade to reverse the rotation of the rotor of the pump, and the stator of the pump will quit. If the stator and rotor of the pump are worn out, the point force can make the stator Get on the rotor. Remove the four bolts on the tees and withdraw the tee. At this point, the gimbal part can be removed. The parts of the universal joint include rubber sleeves, steel sleeves, ties, latches, etc.