Home > Exhibition > Content
cable armoring machine working principle
Apr 23, 2018

The steel strip is fed into more than 4 sets of forming dies and rolled into tubes, then welded into a tube by argon arc welding or high frequency welding in the welding zone, and then pressed into a standard size through two or more sets of shaping dies. Pan or size cut.

There are many methods for dimensioning. For example, a micro switch is installed at a certain length of the discharge port. After the tube reaches the switch, the trigger circuit controls the cutting wheel to cut off the tube. Other methods are similar, but the length is measured. The method and cutting method are different.